Cleanse

Do not store below 5°C or above 40°C.
Make sure the cap is secured tightly after use.
Effective for use for 1 year shelf life
Safety data sheets available upon request
Tested to: BS EN 1276
Manufactured in the UK

Contains: MENTHA ARVENSIS EXTRACT; A MIXTURE OF: CHLOROMETHYLISOTHIAZOLINONE AND METHYLISOTHIAZOLINONE
May cause an allergic skin reaction. Causes serious eye irritation. Keep out of reach of children. Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
CHEMICALS: Always read the label and product information before use.
Do not spray near plant life or aquatics.
Please review our delivery policy for full delivery details

If you are still unsure of the best method to apply any of our GreenBlade products we have some handy hints and tip that may help you combat the nasties in your artificial grass, garden and outdoor space. Lets break it down step by step:
OK, lets get started – we strongly recommend you your brush or broom your artificial grass before applying any GreenBlade product. This will stand your grass blades upright and will allow the product to reach every blade, the grass backing and the sub base (depending on the GreenBlade product is being used but in most cases it will do all three) We also recommend you lightly water your grass area with a hose pipe before applying any product to allow it to adhere.
Don’t forget to shake the bottle and product well. This will bring the bio-enzymes to life so they are ready for action. The bio-enzymes will settle I the bottle over time so a good shake will wake!
The mix ratios are listed but we do recommend that you use sufficient GreenBlade product. In fact you cant use too much to eradicate all the bacteria and odours. Don’t forget the bio-enzymes are only full active when they come into contact with water.
Using a watering can to apply GreenBlade Cleanse will do its job in the fight to remove odours but it will just take a little longer to complete. If you have a domestic jet wash machine with the attachment to apply a snow foam lance and bottle this will speed up the process but be sure to follow our guidance to avoid any issues.
It is important to not use the jet wash spray directly against your artificial grass as this can damage your grass and the sub base its laying on. This will, over time, make your sub base uneven and will create dips and burrows where water will pool and drainage will become increasingly difficult as it will sit within the dipped areas – not to mention the aesthetics and look of your grass and garden. Nobody wants it to look uneven and bumpy. The jet wash and snow foam bottle attachment is used to purely give you much more coverage and to make the job quicker.
Most snow foam attachments have the option to adjust the dilution rates and are usually marked 1 to 6. This can be adjusted as needed and dependant on how strong the odours present are.
It’s time to give your artificial grass a bath! Yes, GreenBlade Cleanse is a sub base soaker and we literally mean soak your grass with the diluted product as recommended.
Once you have applied sufficient product to your grass area (making sure all areas have been covered – not just certain spots) its time for a well-earned rest for five to ten minutes or so. Let the product get to work as it seeks out all those nasty odours and bacteria. Its then time for another brush or broom of the artificial grass and to work the product in and through. We advise working backward so your grass looks upright (with no foot prints), smelling fresh, vibrant and looking like new.
And here’s another couple of reminders to finish:
• Allow sufficient time for it to dry before people and pets to use the treated area.
• There is no need to rinse the grass after you have applied the product as this will only dilute the product further and will make it weaker.
• You can repeat the process if necessary, until all odours have been digested.
• DO NOT USE GreenBlade Cleanse Max in hot, direct sunlight, as this will evaporate the enzymes before they can get to work.
• You can use GreenBlade Cleanse, GreenBlade Active Max and GreenBlade Green Guard with each other as they are pro-biotics and have live bio-enzymes in them.
YOU CANNOT USE GreenBlade Pure Pro with these as it is a biocide and it will break down the live bio-enzymes and they can’t do their work.

Shake well before use
If the area to be treated contains pet faeces, remove these prior to treatment.
We recommend brushing or raking your artificial grass to stand the blades upright. Use a hosepipe to water and evenly coat the artificial grass before applying GreenBlade Green Guard. The product will seep into the grass backing due to Green Guard’s thicker solution.
For use on traditional artificial grass base:
We recommend a dilution ratio of 1 part product to 5 parts water to treat up to a 20²m area, depending on how strong you feel the odours present are.
For artificial grass on hard standing (over concrete, patios, or decking):
We recommend a dilution ratio of 1 part product to 2 parts water to treat up to a 10²m area, depending on how strong you feel the odours present are.
You cannot use too much product to eradicate bacteria or odour, as coverage will very much depend on the degree of contamination.
Apply GreenBlade Green Guard using a watering can, pump sprayer, or snow foam lance bottle. It is important to apply the solution to the entire area (not just isolated spots) to ensure the product comes into direct contact with all areas of contamination. Enzymes are only fully active when diluted with water. Apply evenly.
Finish by brushing or brooming the artificial grass to agitate and work the product through the blades. Allow sufficient time for the whole area to dry fully before allowing pets and people to use the treated area. There is no need to rinse after application. Repeat, if necessary, until all odours and stains have been completely digested.