How to Use Greenblade Products – A Complete Guide on How to Clean Artificial Grass
Keeping your lawn fresh doesn’t need to be complicated. If you’ve been searching for how to clean artificial grass, this step-by-step guide will show you exactly how to use Greenblade products for the best results.
Designed with powerful enzymatic formulas, Greenblade products don’t just mask odours—they eliminate them at the source, leaving your garden clean, safe, and fresh.
Why Properly Cleaning Artificial Grass Matters
Artificial grass may be low maintenance—but without regular care, it can quickly develop:
- Lingering pet odours
- Bacteria build-up
- Organic waste trapped in fibres
Greenblade products are specifically designed to break down organic matter like urine, faeces and other waste, preventing smells from returning.
What You’ll Need Before You Start
Before applying Greenblade products, make sure you have:
- A watering can or sprayer
- Access to water (hose or tap)
- A brush or rake (for debris removal)
💡 Tip: Greenblade products can even be used with foam lances or pressure washer attachments for easier application.
eliminate odours fast!
Step-by-Step – How to Clean Artificial Grass with Greenblade
Step 1 – Remove Debris and Prepare the Area
Start by clearing your lawn of:
- Leaves
- Pet hair
- Loose dirt
This ensures the cleaner can reach deep into the fibres and backing system.
👉 Regular debris removal is essential to prevent drainage issues and odour build-up.
Step 2 – Apply Greenblade Cleaner Evenly
Apply your chosen Greenblade product across the entire area using a sprayer or watering can.
As soon as you apply it:
- You’ll notice an instant fragrance effect
- Odours begin to reduce immediately
Greenblade products are designed to start working on contact.
Step 3 – Let the Enzymes Do the Work
This is where the real magic happens.
Greenblade’s formula uses:
- Enzymatic cleaning agents
- Oxidising technology
These work together to:
- Break down odour-causing molecules
- Target bacteria at the source
- Continue working even after application
💡 Unlike basic cleaners, this doesn’t just mask smells—it removes them completely.
Step 4 – Allow Time to Activate
Leave the product to sit for 10–15 minutes to allow full activation.
During this time:
- Organic matter is broken down
- Odours are neutralised
- Your lawn begins to refresh
Step 5 – Rinse and Finish
Rinse the area thoroughly with water.
Once complete:
- Your lawn will smell fresh
- Bacteria levels will be reduced
- The grass will look revitalised
How Often Should You Clean Artificial Grass?
The frequency depends on usage, but general guidance:
- Pet owners: Monthly (more in warmer months)
- Light use gardens: Every 1–2 months
- High traffic areas: As needed
Greenblade recommends adjusting usage based on:
- Garden size
- Number of pets
- Seasonal conditions
say goodbye to lawn odours
Is Greenblade Safe for Pets and Children?
Yes—Greenblade products are:
- pH-neutral
- Made with natural bacteria-based formulas
- Safe for pets and children once dry
For best results:
- Allow around 30 minutes drying time before use
Pro Tips for the Best Results
To get the most out of your artificial grass cleaner:
✔ Clean regularly rather than waiting for strong odours
✔ Focus on high-use areas (especially pet zones)
✔ Avoid application during heavy rain
✔ Maintain good drainage by removing debris
chments for easier application.
